- General Information
- Manufacturer
- NetComm Wireless Limited
- Manufacturer Website Address
- http://www.netcommwireless.com
- Brand Name
- Netcomm
- Product Type
- Radio Modem
- Interfaces/Ports
- Network (RJ-45)
- No
- Host Interface
- USB
- USB Standard
- USB 2.0
- Physical Characteristics
- Width
- 50 mm
- Depth
- 21 mm
- Length
- 84 mm
- Miscellaneous
- Package Contents
- 4G LTE Cat M1/NB1 Industrial IoT Serial Modem
- 1 x Quick Start Guide
- 1 x DIN Rail Mounting Bracket
- 1 x Y-Cable (Nano-Fit to DE-9 and DC Power Input)
- Additional Information
- UE CATEGORY
- Cat M1/NB1
- 3GPP E-UTRA Release 13
- LTE-FDD:
- Band 1 (2100 MHz)
- Band 2 (1900 MHz)
- Band 3 (1800 MHz)
- Band 4 (1700 MHz)
- Band 5 (850 MHz)
- Band 8 (900 MHz)
- Band 12 (700 MHz)
- Band 13 (700 MHz)
- Band 18 (850 MHz)
- Band 19 (850 MHz)
- Band 20 (800 MHz)
- Band 28 (700 MHz)
- LTE-TDD: Band 39 (1900 MHz, Cat. M1 only)
- EGPRS:
- 850 MHz
- 900 MHz
- 1800 MHz
- 1900 MHz
- Cat M1: 375 Kbps / 375 Kbps (Downlink / Uplink)
- Cat NB1: 32 Kbps / 70 Kbps (Downlink / Uplink)
- GPRS: 107 Kbps / 85.6 Kbps (Downlink / Uplink)
- EDGE: 296 Kbps / 236.8 Kbps (Downlink / Uplink)
- 1 x SMA Connector
- 1 x SIM card slot (2FF)
- 1 x USB 2.0 (Device only): Micro-B receptacle
- 1 x 10-pin NANO-fit (locking) connector providing Serial interface (RS-232 / RS-422 / RS-485)
- 15kV RMS Protection
- Recessed reset button with two functions:
- Reboot
- Reset unit to factory defaults
- PPP
- IP
- Advanced diagnostics and control via SMS
- Query status information - such as Signal Strength, WAN IP, uptime, and many more
- Configure device remotely via SMS such as APN, authentication settings, and many more
- Execute commands via SMS - such as reboot, reset to defaults, go offline, and many more
- Secure SMS management using sender whitelisting and password protection
- SMS acknowledgement replies for queries and commands
- Profile managed packet data connections
- SIM PIN protection
- Automatic and manual cellular band selection
- Automatic and manual operator selection
- Firmware upgrade locally via USB or remotely Over-The-Air
- Triggered firmware upgrade via SMS (initiate download & install from FTP)
- Power input via 10-pin NANO-fit connector
- DC Power input (4.5 - 36 V DC)
- Minimum power input rating of 4 W
- Operating temperature range: -30ºC to +70ºC
- Storage temperature range: -40ºC to +85ºC
- Non-condensing humidity: 5-95% RH @ 60ºC
- Wall mountable via mounting holes
- DIN Rail mount support via included plastic bracket (Top hat section rail TH 35 IEC60715)
- IP40 rated
- Approvals: ACMA / RCM / CE /IC / FCC / GCF / PTCRB
- Features
- Wi-Fi
- GPRS
- Environmentally Friendly
- Yes